I know this is kind of long to be posting, but thought some may want to print it out. Enjoy, Leslee
Cloudbusting
http://www.montalk.net/cloudbusting/cloudbust.html
Part I: Microbusting
An offshoot of orgonomy, weather engineering offers both electrifying experiences and burdens of responsibility for the cloudbuster operator. Though theories as to how or why it works are abundant, research by such notables as Trevor James Constable, James DeMeo, Robert McCullough, and, of course, Wilhelm Reich) has unequivocably shown that methods employed in cloudbusting do influence weather patterns. Further investigations by backyard experimenters as myself only confirm this fact. My own weather operations started in May of 1996 and ended in September of 1997, and although seventeen months may seem insignificant to the years of research conducted by others, the months were sufficient to allow an assemblage of theories and protocols for the production of desired atmospheric precipitation.
Traditional practices in cloudbusting centered around the concept of orgone energy, claimed by its discoverer, Wilhelm Reich, to be a negentropic life force affecting physical, biological, and psychological systems depending on its charge density, rate of flow, and excitability. The various forms of orgone, such as DOR (deadly orgone), and ORANUR (orgone excited by radioactive energy), all have specific effects upon these systems, which are described in the following chart: physical biological psychological atmospheric Orgone Negative ionic, affinity for water, negentropic, blue glow, life-positive, alters alpha decay of radioactive material. Abiogenesis of bions, tingling warmth on skin, enhances healthy growth of life, stimulates cilia movement. Free flow of emotions, sense of well being, vitality, rapidly discharges during orgasm. In dense concentrations accompanied by cumulous clouds and/or precipitation, in low densities by aridity, adds clarity to blueness of sky.
DOR Positive ionic, signifies lack or stagnation of orgone, created by TV's, microwaves, and other electromagnetic sources. Destimulates cilia, slows intake of oxygen, dehydrates the body, causes severe thirst. Creates fatigue, blocks emotional release, deppression. Black clouds without rain, desert-like arid stagnation of climate, stagnant weather patterns, haze Oranur Densely positive ionic, orgone dangerously excited by alpha radiation (as found in smoke detectors), decomposes minerals into brown melanor. Along with symptoms of radiation sickness, clears life-forms within its field of effect. In buildings, creates an atmosphere of aggression, hysteria, claustrophobia, and uneasiness. Shred-like decomposition of cloud edges, cobalt-blue sky.
All three forms of orgone have specific atmospheric effects due to its intense affinity for water; strong concentrations of "good" orgone are accompanied by water, and low densities by arridity. A cloud, for example, is a pocket of dense orgone energy, but the surrounding blue sky contains a lower concentration. According to classic cloudbuster theory, in order for a cloud to "bust," its orgone content must be "drawn" away by some means.
It was by accident that such a means was found. Wilhelm Reich and his associates observed that pipes pointed at a lake before them influenced the shape of waves upon the water. Years later, Reich capitalized upon this effect by relieving what was then known as the DOR Emergency, during which the inhabitants of his laboratory in Rangeley, Maine, became victims to "DOR sickness." He sought ways to rid the area of this deadly orgone which had not only sickened his co-workers, but also caused the static accumulation of dark, drought-like clouds in the skies above. What soon evolved was a contraption composed of twelve copper pipes, each 1.5 - 2" diameter and 10' long, whose bottom ends were connected in parallel to BX electrical cables which were dropped in a well to siphon the DOR from the sky toward the water within the well. After ridding the region of DOR, the cloudbuster was found to be useful for either producing or preventing rain in the region. For several years, Reich offered his services in preventing forecasted rainstorms for special events such as parades and other special events, as well as breaking several droughts beflicting the region.
The theory behind cloudbusting involved a monumental principle: orgone flows from low potential to high. In practice, this meant that to draw orgone from a cloud into a collection of pipes, the orgone potential of the pipes had to be made higher than that of the cloud. This was the purpose of grounding the pipes in water, prefferably running water. Since much orgone was already present in the water contacting the pipes, much more so than within the cloud, when the pipes were aimed at the center of the cloud, the orgone by means of the above principle naturally flowed from cloud to pipe and into the water to be flushed away.
Reich made an analogy between a lightning rods and cloudbusters: both discharge orgone from the sky (lightning was believed to be a super-dense bolt of electricity and orgone), except whereas a lightning rod does so in the fraction of a second, the cloudbuster extends its influence over tens of minutes -- an hour is the usual draw duration. Though lightning rods channel much greater magnitudes of energy than cloudbusters, it is not difficult to see why a cloudbuster produces a more apparent change in shape of a cloud than lightning rods do. It is not the magnitude of energy involved, but rather the rate of energy flow. With the cloudbuster's slower rate of orgone siphoning, the chaotically evolving cloud has a longer time to respond to the influence of a cloudbuster operator.
The rate of draw is dependent upon rate of water flow within the pipe, number of pipes, and the skill at which the cloudbuster is operated. The length-to-diameter ratio determines the range of influence of the cloudbuster; the larger the ratio, the longer the range. Requirements of fast-running water hint at the mechanism by which cloudbusters function. To fully understand how metal tubes pointed at the sky can change it, one must realize that orgone is both an ionic and conscious phenomena. The ionic interactions occuring within the cloud at a molecular level explain, for the most part, how and why cloudbusting is possible. As mentioned, orgone bears characteristics uncannily similar to electrical phenomena, specifically that of ionized air. Orgone and ionized air are compared as follows: Orgone Ions Highly charged orgone accumulators placed in the dark are seen to emit a blue glow. Objects ionized by high voltage electricity give off a blue corona. A healthy dose of orgone "freshens" the air, creates an energized sense of well being. Negative ion generators also freshen the air, stimulate cilia movement within air passages of subjects breathing negative ions -- leading to a better filtration of dirty air and increased oxygen utilization within the body.
DOR causes thirst, fatigue, irritability, and blank stares among its victims. Positive ions (lack of negative ions) decrease cilia movement, leading to throat irritations and thirst caused by lowered production of mucous and resulting increase of foreign particulates entering the lung, and oxygen utilization is lowered, also creating fatigue. Orgone is neutralized or absorbed by water. Static electricity is also
neutralized of absorbed by water. Cloudbusters are like lightning rods, but draw orgone at a slower rate. Lightning rods channel bolts of electricity, cloudbusters channel ions slowly.
Orgone can alter the decay rate of radioactive materials. Ions are known to affect radioactive decay.
Quite clearly, orgone not only resembles electricity, but could actually be electricity with one exception: several behaviors of orgone cannot be fully explained by the physics of ionization alone, which leads to my hypothesis that the unnaccounted factor is of psychic origin, in other words, it is a radionic/conscious factor.
First, however, let's analyze the ionic aspects of orgone before we return to the radionic hypothesis in weather engineering. If we visualize the
interaction between a cloudbuster and its target as being not one of orgone "drawn" into the pipe, but rather ions from the pipe being released into the atmosphere toward that target, then the generation of the ions and their resulting interaction with a cloud's water droplets can elegantly be explained.
One requirement when cloudbusting is fast running water, as mentioned above. The simplest of this type is a copper pipe with a spray nozzled hose inserted into its lower end, as shown in this diagram:
To allow full emersion of the pipe's end into water, a tub can be used:
More advanced and efficient configurations involve atomizing the water into a fine mist before injecting them into the tube. A make-shift version of this type utilizes a motorized air humidifier commonly found at Wal-Mart for $15 during the winter season. A flexible, expandable hose is connected from the humidifier to the pipe:
At the molecular level, neutral streams of water are atomized by the nozzle or humidifier into small droplets light enough to be suspended in air. These droplets, by a well known phenomena, are ionized; when water is split into smaller globules, charge imbalances occur. Often, more negative ions are produced than positive ones as in a rainstorm, where raindrops splashing on the ground shoot off negatively charged droplets (in rare instances, such raindrops have been seen to discharge sparks of electricity upon contact with the ground). Within the cloudbuster's pipe, much of the positive ions aregrounded, creating in effect a filter mechanism by which negatively ionized water droplets are produced and forced from the muzzle of a cloudbuster. This explains why fast-running water is a recommendation: the faster the water, the larger the spray, and the more ionized droplets are created.
Ions leave the cloudbuster to dissipate into the atmosphere and interact with an aimed target, the cloud. Precision to which these ions are capable of being aimed shall be discussed below, for it is radionic fundamentals that explain the precision. Contrary to expectations the ions do not simply drift away like smoke from a pipe, but coherently reach their target in a conical, if not beam-like projection. Once the ions reach a water droplet in the cloud, the largely neutral droplet (which is really a collection of negative droplets around a positive condensation nucleus, the total charge being zero), is split into smaller negatively charged droplets now small enough to be classified as water vapor, which is invisible to the naked eye except for its filtering effect of the sun's rays causing our sky's blue hue. A cloud can therefore be made to "disappear" when its water droplets have been ionized by the cloudbuster's ions into invisible water vapor. Conversely, a section of blue sky, occupied mostly by uniformly charged positive water vapor ions, can be made to coalesce into visible water droplets through neutralization by the interaction with the cloudbuster's negative ions:
Because opposites attract and similars repel (Law of Attraction and Repulsion of Charges), large water droplets can either be made to split into two or more repelling water vapor molecules, or ionized water vapor molecules can be neutralized and caused to coalesce into a cloud.
Therefore, to destroy a cloud, the cloudbuster is aimed at the cloud, and the ions dissociate it:
This is in complete agreement with classic cloudbusting protocol.
Now that ions are known to be partially responsible for weather modifying effects, one can see why waterless cloudbuster units are possible. Trevor James Constable, whose work is detailed in the book Loom of the Future (one I recommend you read for its philosophical insights and profuse number of photographs), mentions waterless units called "blue-bellies", which are in essence orgone accumulators wrapped around the lower half of PVC pipe and bound with duct tape. For those who do not know what an "orgone accumulator" is, visit the PORE webpage. Orgone accumulators are composed of layers of organic and inorganic material, most commonly cotton and steel wool in alternating layers. Such a configuration of materials is said to become charged with orgone, and radiate the orgone to objects near the accumulator. Any physics student can see that alternating layers of metal and insulator forms a capacitor. By virtue of its porous and fluffy texture, such accumulators gather electrical energy and emit a constant field of charged air ions. The source of this charge is gravity, known by Townsend Brown and George Hodowanec to produce self-charge on a capacitor. When an accumulator is wrapped around a pipe, plastic or metal as in the orgone "Volcano" model below,
the pipe will emit ions just as a regular cloudbuster, except without the needfor water.
This principle can thus be applied through a high voltage ion generator inserted into the end of a metal or plastic pipe and aimed at the sky. This method allows, in effect, a power-cloudbuster to be constructed which needs only to be pointed, set, plugged in, and monitored.
However, a question arises as to how so few ions can impact the development of thunderheads (cumulo-nimbus clouds hundreds of yards in height). The answer to this question is easily apparent and stems from the same reason why, under Chaos theory, the air currents generated by a butterfly flapping its wings could eventually lead to the formation of a hurricane. Cloud development, and weather, for that matter, is extremely chaotic and volatile to the smallest factors. A cloudbuster's ion can act as a a crucial trigger in causing millions of other water vapor molecules to coalesce in a chain reaction, much like cloud seeding utilizing dry ice dropped from airplanes into clouds also create a chain reaction.
Unlike the butterfly effect, however, where the trigger's effect is chaotic, the effects of cloudbusting are controlled by radionic means through the mind of the cloudbuster operator. This is an example of consciousness affecting chaos. The more chaotic a system is, the more easily consciousness can both saturate and influence it. A cloud, or the weather itself, is quite chaotic. Just as a sculptor shapes a figure with his hands, so does a cloudbuster operator shape a cloud with his mind into a state more conducive to formation or dissipation, but not without the help of his tools, of course.
Cloudbusters are no different. Ions do, by evidence of their electrical properties, interact with water droplets in clouds, but it is the consciousness factor that tips the scale of the "butterfly effect" one way or the other, towards a thunderhead with a straight column, or a curved one, for example. Since the mind has a special connection to chaotic systems due to it being intelligent and resultingly unpredictable, the cloudbuster operator's mind can influence the otherwise unpredictable development of clouds without a cloudbuster, but unless he were extremely competent in parapsychological feats, his efforts would be in vain without the help of such a device. It is only through the interface of mind and machine that the average person can achieve the spectacular results of cloudbusting.
Orgone is thus a combination of mind and ion, whose effects range from wholly ionic (blue corona) to entirely psychological (emotional armoring).
Neither pure orgonomy nor pure present day science can comprehensively describe or explain the process of cloudbusting, but a combination of orgonomy, radionics, and science can. Once again, it is consilience through which truth is revealed.
Part II: Macrobusting...
Cloudbusting: Macrobusting
Part II: Macrobusting (back to Part I: Microbusting)
Whereas Microbusting details theories and protocols pertaining to the alteration of local meteorological phenomena, Macrobusting involves spawnings of entire weather systems beyond the horizon. Such weather systems owe their existence to low and high pressure air masses, seen as a blue "H" and red "L" on the typical weather map. By engineering a high pressure air mass (Hp) at a particular geographic location, disturbances such as warm or cold fronts, cool and dry or warm and moist air, lake-effect snow, monsoons, Alberta Clippers, and anomalies as omega-blocks, cut-offs, or hyper-latitudinal jet-streams can be created.
Because these systems appear at great distances from the cloudbuster (CB), it is evident that the ions responsible for local cloudbusting work play little part in Macrobusting. Although the butterfly-effect is still in force when altering a region of the nation's weather, radionic principles play a greater part than do electrical ones.
First, let's analyze how Hp's and Lp's (low pressure systems) are formed by a CB, from an orgonomic perspective. As has been stated, high densities of orgone are accompanied by high concentrations of water (rain is the most obvious form), low densities by low water concentrations bringing about dry, blue skies. Under common knowledge, Hp's bring lear skies, and Lp's cloudy ones. Thus, we can conclude that Lp's are infact dense regions of orgone, and Hp's areas of rarefied orgone. Furthermore, CB's "draw" orgone from any point at which it is aimed, leading to the following principle:
An Hp forms in the direction a CB is aimed.
Since orgone flows from low potential (density) to high potential, if a CB is aimed eastward, for example, and lowers the potential of eastern skies, then the atmospheric orgone stream, which normally runs in the same direction as the jet-stream, stops, reverses, and flows westward to its source, streaming away from the area of low potential. However, western portions of the orgone stream beyond influence of the CB are still flowing W to E. As this portion meets with the reversed stream, a damming effect occurs by which an enormous potential of orgone is created west of the CB (see diagram below). Because high potentials of orgone are associated with precipitation, storms spontaneously materialize west of the CB, which, once the W to E orgone flow overpowers the reversed flow, begin to move eastward again over the CB and surrounding regions in sheets of rain.
This former theory, which has proven its validity through countless successful weather operations, can be simplified if viewed from a strictly meteorological point, namely that visualizing reversals of the orgone stream (which is vital for the radionic aspects of cloudbusting to function properly), one simply concentrates upon Hp's, Lp's, and their respective airflows.
Because "high" and "low" are relative terms, one cannot have a "high" without having a "low" pressure system. An Hp is always accompanied by an Lp. More specifically:
An Lp forms in the opposite direction a CB is aimed.
If one aims east, an Lp forms west. To fully understand the dynamics of pressure systems, one must realize that in the northern hemisphere:
Hp's rotate clockwise (cw) and Lp's rotate counter-clockwise (ccw)
Wherever a CB is, an Hp forms which rotates cw due to corriolis forces (the same force that makes water in your sink rotate cw) and picks up moisture from bodies of water in the path of its winds. Experiments have shown that with distances that Hp's form away from a CB, the wind generated by such a system originates 90 degrees cw from a CB's aim:
And thus the following protocol is discovered:
Draw 90 degrees ccw from the desired wind flow direction
For example, if one were in Illinois and requires a moist, southerly warm air flow from the Gulf of Mexico, the CB would be pointed east, for east is 90 degrees ccw from south. Of course, 90 degrees is not a critical number; infact, as will be stated later, a an hour-long "sweep" from 70 to 90 degrees ccw with a CB is an effective method of creating large Hp's. However, please attempt to keep aim within this range, otherwise accuracy will suffer dearly.
Now let us discuss warm and cold fronts. Warm fronts occur when(assuming weather normally flows from W to E accross a region) an Lp west of a location collides with and overruns an Hp:
Because the moist, warm, low pressured air is "lifted" to higher altitude where temperatures are considerably cooler, the Lp's air must also cool. Since cooler air cannot hold as much moisture as warmer air per unit volume, the moisture must condense to a form more commonly known as rain or snow. The boundary between the air masses in such a case is a warm front.
Conversely, a cold front is established when an Hp approaches an Lp from the west, and digs beneath it with the same lifting effect. This is rightly called a cold front.
Combining diagrams of direction of draw, source of moisture, resulting Hp and Lp, and front gives us the following diagram:
As is evident by the diagrams, a cold front is engineered by aiming the CB into the main weather flow, and a warm front by pointing away.
How does one determine the "weather flow" described above? Visually, one may observe cloud movement or direction of wind, but be aware that oftentimes clouds of different altitudes move at separate directions. What we must be concerned with is the motion of storms in general. It is known that storms follow the jet-stream in their trek accross the country. Thus, it is best to consult weather maps of the current jet-stream to know in which direction one should draw.
In summary of fronts and their relation to Macrobusting:
Warm fronts are created by aiming away from the jet-stream's path of flow, and will follow the direction of the stream once created. Cold fronts are created by aiming into the jet-streams's path of flow, but will also follow the direction of flow once created.
But what happens when the CB draws in a direction not parallel to the jet-stream? The jet-stream then actually changes its course to become parallel:
Don't expect to ever reverse the direction of a jet-stream. At most, you will either create a "cut-off" or an "omega-block":
Now that we know in what direction to aim, there are several other factorss to take into account: the elevation of aim, strength/geometry of the CB, duration of draw, and sweep of aim.
First, the elevation in part determines range. A water powered copper pipe such as the following,
aimed at 20 degrees above horizon can be expected to create an Hp with centerlocated almost 500 miles from the draw site. At 45 degrees, range reduces to 200 miles. But since Hp's and Lp's are 100's of miles in diameter, even a long-range CB has power to influence local weather, albeit indirectly. A long range is useful for engineering massive Hp's west or NW of a location, which results in a quick, powerful, cold front storm followed by several days of sunshine and cooler weather.
Due to storm systems moving rather quickly to the east, when making warm fronts (east draw) care must be taken to use short-range aim, since if an Hp is formed too far east, so will the warm front, overshooting the target location by many miles and bringing rain to places that do not need it. Therefore:
For cold fronts, aim low on horizon and into the jet-stream.
For warm fronts, aim halfway to zenith and down the jet-stream.
Second, the construction of a CB is obviously of critical importance and affects the range at which Hp's are formed. The following list of devices are arranged by order of decreasing range:
1)Long, 12' gutter pipes, water-powered, set up in rack formation.
2)Single or double copper pipes, 10' by 2", water powered.
3)Orgone laser (described below), dry
4)Furnace pipe, 5ft by 6 - 8 ", water powered.
5)Orgone volcanoes.
6)Trevor James Constable's geometric devices.
7)Ion guns.
Numbers 1 - 4 are best for Macrobusting, and 5 - 7 for Microbusting. Geometry plays an integral role in TJC's equipment, but that is beyond the scope of this article. TJC has been extremely careful about what information he divulges to the public concerning some of his CB's, such as the use conical shapes and the golden ratio combined with rotary motion in his more secret devices. Because I have not successfully replicated these devices for lack of information, I cannot offer advice to the reader concerning this matter.
The orgone laser has been my primary tool and works well as a long-range waterless CB. It consists of a 5' by 8" sheet metal furnace pipe (available cheaply at your local hardware store), whose end is covered with a sheet metal backplate rivetted in place. Windows are cut at 1/4 distance up from the bottom, and an orgone matt made of alternating plastic and aluminum foil sheets (with aluminum on the inside and plastic on the outside) is wrapped around the lower half and duct-taped securely:
Third, duration of draw is the most important of all factors, It decides the difference between a massive hailstorm and gentle rain. For long-range water-powered, it is recommended by experienced CB operators that one draw no longer than one hour. This is critical. For the orgone volcano and laser, which are more experimental, I have found a draw time of several hours as safe. Occasionally, they were in place overnight without severe consequences, unless the tornadoes in Texas were the effect (which I seriously doubt since the range would've had to have been 700 hundred miles). When trying novel devices built at home, try them for no longer than 1/2 hour the first attempt, then increase duration the next week and observe the effects if all went well the first time. It is esciting to observe radar spots of red on the TV screen, but always be aware of the mortality that goes along with it. How much is a life worth at the expense of your foolery? Think twice before drawing double the norm just to see an overkilled hit being spoken about on the six-o'clock news. (I have done this accidentally once, but never again)
Lastly, sweep of aim controlls the cross-span of an Hp. By sweep it is meant the periodic repositioning of a CB muzzle to sweep an arc accross the sky over duration of draw (by the way, "draw" is an old lable where orgone is thought to be "drawn" into a pipe and directed with a "sweeping motion." With my ion model, it is more likely that ions are shot from the pipe, but both explanations can bring weather operations to fruition). For example, one may position a CB south-east. Then, after 5 minutes, the muzzle is shifted left or right by an increment equal to the arc divided by the number of repositionings (see diagram below). Sweeps can be made horizontally or vertically. Horizontal sweeps broaden the Hp's span, and vertical sweeps better reverse the orgone stream , or, if one preffers my point of view, creates a more dense Hp, and thus better storms. Vertical sweeps should be raised no higher than 45 degrees above horizon, otherwise inaccuracy will result.
Once a CB session is completed, one can expect to observe the following: 1) 18 - 22 hours after the session's mid-point, a small patch of rain roughly 100 miles in diameter moves accross the region without the presence of a front:
At this point the weather map may show signs of an occluded front (purple dashed line) forming 500 miles opposite of draw. The small patch of rain gives about .15 inches of precipitation in most locations except near the site of draw. Because the air is still litered with an overabundance of ions due to Micro-effects, the patch of rain disintegrates above, but re-forms once it passes:
You will also note that on a sunny day with cumulus clouds abound, such clouds will also disintegrate and start to "shred" above. This is classically blamed on DOR or ORANUR, but it is really due to extreme levels of ion density (remember that ORANUR is orgone energized by radioactivity, and that radioactivity ionizes air, hence the term "ionizing" radiation, showing that air ionized by a radioactive material coupled with a radionic element is equivalent to ORANUR).
One to two days after this rain patch moves through, the occluded front will have transformed into a prominent warm front which will finally trek eastward and bring lots of precipitation to the target area, including the draw site (if you empty a bucket of water above an ion generator, the water will soak it. Likewise, a warm front will overpower any residual ions left in the CB area. Also, the extra two days allowed for ionized air to be thoroughly ventilated and diluted.)
If, however, the CB was aimed incorrectly and not parallel to the jet-stream, the bulk of precipitation will land north or south of the target site.
Now, to give the reader a better idea of how to go about cloudbusting, a thorough example of a typical CB session is given. The CB operator is located in middle Illinois, which is currently under the influence of a high pressure system to the NE, with SE winds at a gentle breeze. A low pressure area is south, and due to move east quickly, with more high pressure from the NW expected to bring no precipitation for the next five days. Temperatures are in the upper 80's and the humidity is at 65%:
The CB operator decides to bring a premature rain to the region in the form of a warm front, and observes the jet-stream over his location from NW to SE. Therefore he chooses to aim his CB south east, away from the jet-stream to get a visible hit on his own location. The Lp and Hp in place will move out soon to be replaced be the HP north west, but by creating a new Hp southeast of the site (in direction of aim), an Lp will inherently form NW, either replacing or modifying the predicted Hp.
He utilizes two units, a 10' by 2" copper pipe and an orgone laser. After propping both pipes up on lawn chairs at 30 degrees above horizon, he inserts a misting spray nozzle in the copper pipe's end. The copper pipe is swept from 15 degrees left to fifteen degrees right of SE at intervals of five minutes. The laser is positioned low on the horizon to be swept vertically upward to 45 degrees over the same duration as the copper pipe, an hour's long draw. After an hour, the copper pipe is disconnected and stored, but the laser is repositioned to its original aim 15 degrees above zero. Later that evening, it, too, is put away.
Twenty hours later, in the early afternoon of the next day, radar shows a frontless patch of rain approaching and overtaking the area, but the CB site receives only sprinkles for less than twenty minutes. (the patch of rain is less than 100 miles accross, otherwise it must have moved at 300 mph, which is impossible). This is the first wave of precipitation, already forcing a contradiction of the weather man's predictions.
Over the next two days, an occluded front is observed to spawn and develop in north Dakota and an Lp is seen arising where the former Hp was. At the end of two days, a warm front has developed, sending moisture from the Gulf into Illinois for a span of fourteen wet hours(see new weather map below). Mission accomplished.
Of course there are many variations on this theme, but it gives good insight as to what one can expect when Macrobusting. But don't forget that what is west, must go east, and all storms running over Illinois do not just "disappear" once the pass the state. They gather in strength as the move eastward, soaking those in the East Coast, particularly in Virginia and North Carolina with the example given. It doesn't take a tornado for one to know that his CB works, so do not attempt this.
Here is more advice:
To create cooler weather draw westward; this allows a Hp to form west, channeling in cool air from the north.
To break a drought, find large body of water such as the Gulf, the oceans, or the Great Lakes, and aim the CB 90 degrees ccw from that direction. Winds will cary moisture from those sources and dump it on the target location.
To clear an overcast sky (a Microbusting protocol), set up as many pipes as possible in a tub pointing at all skyward directions, and flood the tub with water, or use one pipe and sweep from the zenith to horizon in a helical manner, stopping for several seconds every twenty degrees rotationally, then repeat until sky is clear.
To make it snow, wait for cold temperatures, and follow the same direction as in breaking droughts, except allow the moisture source to clash with cold air over the target location. Snow fall accumulations are a good way of measuring your accuracy, since incorrect alignment will give snow in a streak north or south of your desired site. The only hard part is using a water hose at subfreezing temperatures, unless you use a waterless unit. Don't forget the brutality of blizzards and fatal traffic accidents that come with it, so don't overdo it.
Lastly, to check if a front on the current map is natural or man-made, one should observe the smoothness and continuity of fronts. If they are rounded and simple, chances are that they came from natural sources. However, if they appear broken and malformed, they are man made (see below). This is most obvious in the summer months. Also look for steady streaks of clouds in the satellite loops, for they indicate evidence of Microbusting.
This ends our discussion on cloudbusting in its typical forms. If the reader chooses to try any of the material herein, he is advised to learn an adequate knowledge base on meteorology and orgonomy before starting. Reading orgonomy-related books and watching the Weather Channel for a couple months should suffice, unless one were to employ himself in proffessional cloudbusting, in which case many years of study and experience are recommended. Because the sky is finite, other CB operators may be performing their own experiments on the same portion of it, unaware of one another. Then they wonder why the results went contradictory to their expectations. It's best to always document one's proposed operation at a public forum such as PORE's cloudbuster forum, so that other CB operators in the area know to refrain from getting out their equipment in the same week.
There is much more to be discovered in the diverse variations of cloudbusting, and while the government is breaking its back trying to change the climate with megawatts of microwave power as in the HAARP project, you can accomplish ten times over what they can in the leisure of your own back yard using the gentle principles of nature discovered by the great Wilhelm Reich. Good experimenting to all!
http://www.montalk.net/cloudbusting/cloudbust2.html
HE-Space-Ancients-Astrology-Musings-More
http://seekers.100megs6.com/index.htm
ยทยทยท
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.314 / Virus Database: 175 - Release Date: 1/11/02